Quantcast
Channel: PHPDeveloper.org
Viewing all articles
Browse latest Browse all 5

Brian Moon: Using socket_connect with a timeout

0
0

In a new post to his site Brian Moon has shared a problem he had with sockets and timeouts and having them perform the same way every time. He walks through the symptoms he was seeing and provides his own solution in the end.

So, it seems that when you try and connect to an IP that is routable on the network, but not answering, the TCP stack has some built in timeouts that are not obvious. This differs from trying to connect to an IP address that is up, but not listening on a given port. [...] After a lot of messing around, a coworker pointed out that in production, the failures were happening for an IP that was routable on the network, but that had no host listening on the IP.

After some testing, Brian figured out that his problem was using localhost for testing and not an actual non-host server. He made the switch and figured out how to set the timeouts low and work with error state checking to make things more stable. He explains a bit more about how the code in his solution works. You can find his solution in this gist on GitHub.

Link: http://brian.moonspot.net/socket-connect-timeout

Viewing all articles
Browse latest Browse all 5

Latest Images

Trending Articles





Latest Images